Files

Claude 0d82f9b7ba docs(01-01): complete plan — hardware checkpoint approved, coexistence validated

- Task 4 hardware checkpoint approved: zero flicker during 30s UDP burst test
- WIFI_PS_NONE confirmed working on ESP32-C3 SuperMini
- GPIO3/6/7 pin assignments validated on physical hardware
- Updated SUMMARY.md with hardware test result and plan completion
- STATE.md advanced to plan 3, progress bar updated to 25%

2026-04-03 13:21:53 +02:00

3.1 KiB

Raw Blame History

gsd_state_version, milestone, milestone_name, status, stopped_at, last_updated, last_activity, progress

gsd_state_version

milestone

milestone_name

status

stopped_at

last_updated

last_activity

progress

1.0

v1.0

milestone

executing

Completed 01-01-PLAN.md (4/4 tasks) — hardware checkpoint approved, plan complete

2026-04-03T11:21:33.574Z

2026-04-03

total_phases	completed_phases	total_plans	completed_plans	percent
4	0	4	1	0

Project State

Project Reference

See: .planning/PROJECT.md (updated 2026-04-03)

Core value: Songs mit LED-Animationen choreografieren und abspielen — der Nutzer baut Timeline-basierte Lichtshows zu seiner Musik. Current focus: Phase 01 — esp32-firmware

Current Position

Phase: 01 (esp32-firmware) — EXECUTING Plan: 3 of 4 Status: Ready to execute Last activity: 2026-04-03

Progress: [░░░░░░░░░░] 0%

Performance Metrics

Velocity:

Total plans completed: 0
Average duration: -
Total execution time: 0 hours

By Phase:

Phase	Plans	Total	Avg/Plan
-	-	-	-

Recent Trend:

Last 5 plans: -
Trend: -

Accumulated Context

Decisions

Decisions are logged in PROJECT.md Key Decisions table. Recent decisions affecting current work:

[Roadmap]: Hardware-first build order — ESP32 is the validation target for all Pi-side work; developing against a mock risks protocol mismatches late.
[Roadmap]: WiFi+RMT coexistence must be tested on day 1 of Phase 1 (documented FastLED #1657, February 2026 — actively problematic on single-core ESP32-C3).
[Roadmap]: SK6812 is RGBW (4 bytes/LED) — configure explicitly before any animation code; retrofitting requires protocol version bump.
[Phase 01-esp32-firmware]: GPIO3 for SK6812 RMT (safe on SuperMini); GPIO6/7 for WS2801 SPI with GPIO0/1 fallback noted for JTAG conflicts
[Phase 01-esp32-firmware]: NeoWs2801Spi2MhzMethod for 5m cable signal integrity; NeoGrbwFeature for SK6812 RGBW 4-byte mode
[Phase 01-esp32-firmware]: -DESP32_ARDUINO_NO_RGB_BUILTIN mandatory in platformio.ini to prevent RMT driver conflict with Arduino core 3.x
[Phase 01-esp32-firmware]: Hardware coexistence validated: WIFI_PS_NONE eliminates RMT flicker on ESP32-C3, zero flicker confirmed during 30s UDP burst test
[Phase 01-esp32-firmware]: GPIO3/6/7 pin assignments confirmed on physical hardware — no JTAG conflicts, fallback GPIO0/1 not needed

Pending Todos

None yet.

Blockers/Concerns

[Phase 1]: ESP32-C3 RMT+WiFi coexistence has conflicting documentation — test simultaneously on first flash.
[Phase 1]: GPIO pin assignment for simultaneous RMT (SK6812) + SPI (WS2801) on SuperMini needs hardware validation.
[Phase 2]: aubio 0.4.9 ARM pip wheel on Raspberry Pi OS bookworm unverified — may require source build.
[Phase 2]: sounddevice + miniaudio simultaneous PipeWire access needs early testing.

Session Continuity

Last session: 2026-04-03T11:21:33.565Z Stopped at: Completed 01-01-PLAN.md (4/4 tasks) — hardware checkpoint approved, plan complete Resume file: None

3.1 KiB Raw Blame History